Underfloor Heating

The Tile Depot is proud to stock Australaisias only designed and manufactured underfloor heating kit... Livella. Livella is smarter, safer and surprisingly affordable. Its brilliant combination of custom laid cables and a revolutionary new type of thermostat will transform your living spaces, keeping your family safe, warm and comfortable all year round.

So intelligent, your new Livella heating system will share its energy saving smarts with other appliances including lights, towel warmers, fans and demisters. Now you can enjoy the gentle natural feeling of beautifully heated floors with less wall clutter and all the convenience of home automation.

Flexible, Easy-to-Install Underfloor Heating Product
Livella is proud to feature the first and only Australasian designed, engineered and made underfloor heating system. As such, you can rest assured that you are dealing with an expert team dedicated to delivering the finest products on the market, suited specifically to local requirements.

Finally, Underfloor Heating Done Right

Livella overcomes the drawbacks of all fixed length and fixed form surface heating with a variable power heating element connected to a state-of-the-art control panel. This flexibility allows customers to take complete control over the design process ensuring that the right amount of heat is delivered across the entire floor and managed in the most energy efficient way possible. This is, quite simply, radiant heating done right.

•Balance Power Output Between Rooms
•Always 100% Floor Coverage
•Heat Stairs and Showers
•Single Product for all Floor Coverings
•Highly Configurable Thermostat
•Quick and Easy to Repair
•10 Year Guarantee
•Use Single Element for Multiple Rooms
•Up to 22.5m² Coverage with a Single Element
•Heat Under Multiple Coverings with a Single Element

A Livella underfloor heating system is truly unique. Unlike other products that deliver a predetermined wattage managed by a generic thermostat, a Livella Heating system can be installed to your exact specifications. With Livella there are no compromises and no regrets, only clean, comfortable and inviting spaces.

Suitable for DIYers or professionals alike. You will need a sparky to conect the wirers but everything required to install the system comes in the complete kit, with sizes varying from 1m2 to 22.5m2.

	Floor Preparation The floor is first swept and vacuumed to reveal a level surface free from contaminants. The included floor primer is then diluted with water, applied across the entire floor and left to dry for 30 - 45 minutes.
	System Design First, the total available floor area is measured. Using a simple formula, this value determines the element spacing. The location of the cold lead and thermostat is also chosen to suit the design of the room.
	Fixing of the Element The included cloth tape is used to securely fix the element to the primed floor. The element is then returned to the starting point after achieving 100% floor coverage. Any excess element is cut off. Lastly, the remote sensing probe is positioned in an appropriate location.
	Cold Lead Connection The heating element is connected to the in-wall cold lead. An installation monitor is then attached to ensure that the element remains undamaged while the floor covering is fixed.
	Cable Embedment A cable embedment or flexible floor leveling compound is applied over the element to a depth of 4mm for hard floor coverings and 6mm for soft floor coverings. This is optional where a cement mixture is to be applied over the element.
	Connection of Thermostat A fully programmable thermostat is connected to the cold lead and remote temperature sensor. An operating schedule is programmed to suit the lifestyle and routine of the occupants.